Introducing the Ford Heavy Duty Adjustable Front Track Bar for 2005+ Super Duty trucks. Adjustable track bars are used to help center your axles when leveling the truck or running a suspension lift. This track bar significantly improves lateral stiffness over stock and is considerably stronger than stock to hold up to the abuse of large tires and aggressive off road driving. Length is adjustable on the vehicle to make adjustments a breeze. It uses a maintenance free Synergy Dual Durometer Bushing on the drivers side and a metal on metal HD tie rod end on the passenger. The bar is bent to clear most aftermarket differential covers at full bump. Pair with Synergy's Drag Link and Tie Rod to bulletproof your steering and guarantee product compatibility from stock height to 4 inches of lift.
Fitment:
2017+ Ford Super Duty F-250 / F-350
2005-2016 Ford Super Duty F-250 / F-350 with use of 8675-11 Adapter Slug
2005+ Ford Super Duty F-450 / F-550 with use of 8675-11 Adapter Slug
Benefits:
Allows centering of front axle when running a suspension lift
Adjustable without removing from vehicle
No jam nuts that are impossible to keep tight
No modifications required to install
Isolates Noise, Vibration, and Harshness (NVH) increasing ride quality
Compatible with Synergy HD Steering
Bent to clear most aftermarket differential covers 
Limited Lifetime Warranty
Features:
Made from high quality 1.50 inch x .250 wall DOM
Retains factory track bar mounting bolts & hardware
Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing control arm mounting bolt
Features Synergy Dual Durometer Bushing (DDB) with Teflon bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality (drives side)
Features Synergy greaseable metal on metal tie rod end for stronger connection to the axle
100 percent bolt on components assures an easy, trouble free installation with the use of basic hand tools
Min/Max Length:
Measured in a straight line from center of bolt hole to center of bolt hole
Min collapsed length: 36.375 inches
Max extended length: 37.75 inches
Includes:
(1) Synergy Ford Track bar
(1) Synergy Ford tie rod end
(1) Synergy double adjuster sleeve
(1) Synergy forged end with dual durometer bushing 
Notes:
2005-2016 F-250 / F-350 and 2005+ F-450 / F-550 will need to use Synergy part 8675-11 adaptor slug, to convert the early model axle interface to a late model
2005+ F-450 / F-550 will run the track bar in a different position than the F250 / F350. Please see the instructions below for correct installation 
2005+ F-450 / F-550 will also need to run a minimum of 2 inches of bump stop to avoid possible contact with frame components
The replacement driver side bushing - 4327-02
The replacement passenger side tie rod end - 4154-L 
Synergy High Performance Grease recommended (4119)